These pictures are a step by step install of the full face stereo headset - The open face install is done the same way only the mic portion is different

 Speaker_cover_off_ds

Install speaker covers to each speaker

Mic_speakers_alone_ds

Speaker covers installed on each speaker

Velcro_mic_ds

Install velcro tab on the back of the mic

Velcrotab_speaker_ds

Apply the velcro tabs to the back of each speaker

Velcro_on_speaker_ds

Velcro tab applied to speaker

Speaker_outside_pocket_ds

This is the communication speaker pocket located on each cheek pad

Speaker_pocket_ds

Slide each speaker into the speaker pockets of the cheek pads

Speaker_in_pocket_ds

Communication speaker installed into the speaker pocket of the cheek pad

Popsicle_stick_wires_ds

Use the wedge stick (included) to slide the speaker wires under the neck roll and up behind the liner

Mic_on_ds

Wires are now hidden, both speakers installed, now apply the mic to inside of helmet chinbar using velcro tabs (included)

Full

Full_mount

The mic on the full face headset attaches to the inside of the chinbar using a Velcro strip that is included

TOP
0 Items