Saber™ Professional Synthetic 100:1 Pre-Mix 2-Cycle Oil (ATP) AMSOIL Saber™ Professional is formulated with exclusive AMSOIL synthetic base oils and premium additives. Designed for lean mix ratios in two-cycle motors, Saber 2-Cycle Oils have excellent lubricity and cleanliness properties to control friction and help prevent wear, plug fouling, ring sticking and exhaust port blocking. Saber 2-Cycle Oils also feature an anti-rust formulation to counteract the damp environments often encountered in two-cycle applications. AMSOIL 100:1 Synthetic 2-Cycle Oils have been protecting and providing improved performance in two-cycle motors since 1973.
AMSOIL 2-Cycle Oil Lineup ATP Applications "The Fabulous Four"
hp Injector Synthetic 2-Cycle Oil (HPI) Saber Professional Synthetic 100:1 Pre-Mix 2-Cycle Oil (ATP) Saber Outboard Synthetic 100:1 Pre-Mix 2-Cycle Oil (ATO) INTERCEPTOR Synthetic 2-Cycle Oil (AIT) DOMINATOR Synthetic 2-Cycle Racing Oil (TDR)
Saber Professional (ATP) is specifically designed for small engines including, but not limited to, chain saws, lawn equipment, blowers, chop saws, pumps, scooters and go-carts. It is available in a 3.5- oz. bilingual (English/Spanish) container which is ideal for treating the 2 – 2.5-gallon cans of gas commonly used for storing mixed gas on the job. Saber Professional also works well in motorcycles, snowmobiles, ATVs, jet boats and personal watercraft. Saber Professional is formulated with high-temperature detergent additives to help prevent hard carbon deposits from forming in these hot-operating motors. Saber Professional is “smokeless” and delivers fewer emissions at 100:1 mix ratios than oils mixed at 50:1. Equipment operators subjected to smoke and fumes will benefit from these low emission properties. Because one mix ratio satisfies multiple pieces of equipment, Saber Professional eliminates mix ratio confusion. Saber Professional is recommended for pre-mix where ISO-L-EGD, JASO FD or API TC is specified.
Applications (2-Cycle Recommendations Chart) AMSOIL Saber 100:1 2-Cycle Oil is recommended for 100:1 mix ratios in normal service. Richer mix ratios may be used where desired.
Kinematic Viscosity @ 100°C, cSt (ASTM D-445)
Kinematic Viscosity @ 40°C, cSt (ASTM D-445)
Pour Point °C (°F) (ASTM D-97)
Flash Point °C (°F) (ASTM D-92)
