Take Advantage of Every Inch of Vertical Wall and Door Space in Your Trailer or Garage
The Long Trailer Pouch® is designed to store smaller tools and objects and is perfect for hanging on the door. It is constructed of 1000 Denier Cordura and has one handle centered along the top edge for portability.
The Trailer Pouch® is simple to install if you follow our recommended guidelines.
Trailer Pouch® Installation on Trailer Wall
| Materials Needed |
| 3/4" Wood Screws |
2" Rope Hooks |
| Drill |
1" x 4" Runner (Optional) |
- Please refer to the grommet specifications below to determine the grommet spacing for the Trailer Pouch® that you have purchased.
- Your trailer will need to have a pre-installed runner attached to the studs along the top section of the trailer walls to install your Trailer Pouch®. Many trailers come with this runner installed. If your trailer does not have the runner installed, you will need to screw a 1"x4" board into the wall studs. Contact your trailer manufacturer for the correct stud spacing.
- Use 3/4" screws to attach 2" rope hooks to the runner for each grommet hole. NOTE: We do not recommend using screw hooks.
- Hang your Trailer Pouch® on the hooks and enjoy!
Trailer Pouch® Installation on Trailer Door
| Materials Needed |
| 1/2" Wood Screws |
2" Rope Hooks |
| Drill |
|
- Please refer to the grommet specifications below to determine the grommet spacing for the Trailer Pouch® that you have purchased.
- Use 1/2" screws to attach 2" rope hooks to the door for each grommet hole. NOTE: We do not recommend using screw hooks.
- Hang your Trailer Pouch® on the hooks and enjoy!
Grommet Specifications
| Trailer Pouch® Size |
Grommet Spacing |
Total Number of Grommets |
| Small |
9" |
3 |
| Medium |
12" |
4 |
| Large |
12" |
5 |
| Long |
9" |
3 |
