1. Road Wrap can be cut to fit any vehicle and left on for up to seven days. Be sure to apply on clean and dry areas only.

2. Attach film to one side of vehicle. As you pull product across the vehicle, smooth film out during application. If you need to reposition, simply peel the film up and reapply. Once you reach the other side, use the tool included and cut to desired length. For a smoother appearance, apply a soft cloth on the top edge of the slitter and use as a squeegee while installing Road Wrap.

3. Always make sure at least a four inch edge of the product is securely fastened to vehicle to eliminate separation when traveling.

4. When applying more than one row, begin with the top strip and work your way down while allowing a 2-3 inch overlap of the bottom strip.

5. After your Road Wrap has been applied, use the included cutting tool to trim the opening for the grill and air dam areas. (CAUTION! SKIPPING THIS STEP COULD ALLOW VEHICLE TO OVERHEAT AND POSSIBLY CAUSE ENGINE DAMAGE.)

The product cut from the grill area can be applied to side mirrors if needed.
WARNING: DO NOT PUT ON WINDSHIELD.

REMOVAL

Road Wrap makes removal easy and clean. After traveling on vacation or commuting back and forth to work all
week, the film is then simply removed without any harm to your paint and discarded leaving your vehicle clean.

If any glue residue is left on vehicle after using Road Wrap, simply use rubbing alcohol or a glass cleaner on a soft cloth to remove.

HELFUL HINTS

• Apply film in a shaded, well lit, dust free environment.
• Film best applied between 50F – 90F.
• Installation is easier with two people.
• Condensation may occur if moisture is trapped between film and surface.
• Once you are done using Road Wrap place back in box.