NOTE - This listing is for the bare DIVA unit without bullet cameras and requires a camera(s) from your existing PDR or other ChaseCam product to work! If you need an entire system, please select one of the DIVA Racer Packages.
Finally, get the data and the video automatically synced up in an easy, single box solution. Get real-time data overlay in a single box solution. Get multiple camera views in a single box solution: The DIVA.
The world’s best video quality in any combined video and data recorder. Plug and play with an amazing list of features. (All features are subject to change as Chase continues development)
Features:
- Same size as existing ChaseCam PDR100.
- Less than one pound.
- Less than one amp in current draw (with one camera) using 12V DC
- Field upgradable with a simple download
- Auto Record based on triggers such as speed or Gforces, totally hands free
- Status outputs via serial ports*
- Can collect and overlay lap times, time/date, frames and more*
- Can record based on “events”.
- Can pre-record continuously.
- Can recycle record, which allows continuous recording
- Rugged anodized aluminum case with protective rubber bumpers
- Locking camera connector. Single circular connector for up to 4 cameras.
- Locking data and remote connectorsLocking power connector
- Status LEDs on the front indicate pause, record, power, trigger armed, GPS signal, and more
- Single button on front for easy manual control (if not using hands free setting)
- Easily locks into an innovate mounting bracket.
- Easily transferred from car to car.
- The industries highest quality and most versatile camera mounts
- Records onto industry standard HC SD Cards, up to 32 gigabytes capacity to record many hours of video and data.
- 4 gigabyte max file size, can record consecutive 4 gigabyte files
- User settable compression rates: SuperFine: 4 Mbits/sec (35 minutes per GByte); Fine: 3 Mbits/sec (47 min/GB); Normal: 2 Mbits/sec (70 min/GB)
- Full 720x480 (NTSC) @ 30fps and 720x576 (PAL)
- LAN-C connection
-
Able to be upgraded to High Definition when it is available (a reasonable charge to upgrade will apply). HD unit will be a single camera recorder and will require an HD video head (now in development). At this time, our HD recorder in development does not allow real time data overlay. It will of course record automatically synced data with the HD video and our DashWare can expertly display the overlays.
-
New Power Supply!
-
- 6-28Volt input range. The widest range on the market.
- Built in back up power to handle power loss or drops without corrupting video or data
- Built in back up power allows the user to turn on the car and not lose video
- Improved power filtering can handle very noisy power and provide a clean camera feed.
- Improved noise emissions
- Intelligent power features to automatically turn on and off the unit.
- Able to feed power to 4 separate video cameras and external devices
- Built in surge protection
- Can run off external battery pack
*Some features are still in development. Unit will be able to be easily field upgraded by the end user with a simple file download at no charge.
*Some features are still in development. Unit will be able to be easily field upgraded by the end user with a simple file download at no charge.
Video
*Some features are still in development. Unit will be able to be easily field upgraded by the end user with a simple file download at no charge.
Sound
- On board high quality microphone, keeps the microphone out of the wind!
- User adjustable sensitivity
- Can use external stereo microphone, easily plug in and automatically switches over.
- Can use external stereo driver communicationOn board mixing for internal microphone and external audio feed
- On board speaker for playback
- Sound outputs for external devices
*Some features are still in development. Unit will be able to be easily field upgraded by the end user with a simple file download at no charge.
Data
- Can overlay data onto video in real time. No post process needed*
- Can collect all data for later analysis and manipulation.
- Can overlay data and collect at the same time
- Serial RS-232 interface
- CAN Bus interface (2)*
- RPM input
- 0-5V sensor input
- High resolution
- GPS+/- 16G high accuracy accelerometer, 3 axis (allows any orientation of the unit)
- Interfaces to many data acquisition and ECUs and more in development
- Automatic interface to DashWare application for instant custom gauge overlays.
*Some features are still in development. Unit will be able to be easily field upgraded by the end user with a simple file download at no charge.
If you're going to be purchasing the DIVA standalone to use with existing camera used with PDR100 - here are the options:
(Note: the data harness is necessary for use with the OBDII and DashWare is necessary to extract any data from the video.)
Most of the existing PDR accessories will also work with the DIVA unit - the A/V cable for direct playback to a monitor, the Lan-C remote control, PDR/DIVA mounting bracket, MSD Tach.
